Cisco 2 Capstone Project Lab 6 + PKT file

lab (2)

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway
HQ Fa0/0 N/A
S0/0/0 N/A
S0/0/1 N/A
Lo1 N/A
BRANCH1 Fa0/0 N/A
S0/0/0 N/A
S0/0/1 N/A
BRANCH2 Fa0/0 N/A
S0/0/0 N/A
S0/0/1 N/A
PC1 NIC
PC2 NIC
PC3 NIC

o    Subnet the Address Space

The addressing for the network has the following requirements:

  • The 172.20.0.0/16 network must be subnetted to provide addresses for the three LANs. (Use VLSM and do not allow for any more host addresses than necessary.)
  • The HQ LAN will require 500 addresses.
  • The BRANCH1 LAN will require 200 addresses.
  • The BRANCH2 LAN will require 100 addresses.
  • The loopback address representing the link between the HQ router and the ISP will use the 209.165.200.224/30 network.
  • The 192.168.1.48/28 address space must be subnetted to obtain the addresses for the links between the three routers.
  • Assign subnetwork addresses to the Topology Diagram.
    1. Assign subnet 0 of the 172.20.0.0/16 network to the HQ LAN subnet.
    2. Assign subnet 1 of the 172.20.0.0/16 network to the BRANCH1 LAN subnet.
    3. Assign subnet 2 of the 172.20.0.0/16 network to the BRANCH2 LAN subnet.
    4. Assign subnet 0 of the 192.168.1.48/28 network to the link between the HQ and BRANCH1 routers.
    5. Assign subnet 1 of the 192.168.1.48/28 network to the link between the HQ and BRANCH2 routers.
    6. Assign subnet 2 of the 192.168.1.48/28 network to the link between the BRANCH1 and BRANCH2 routers.
  • Assign appropriate addresses to the device interfaces.
    1. Assign the first valid host address of the 209.165.200.224/30 network to the Loopback interface on the HQ router.
    2. Assign the first valid IP address of the HQ LAN network to the LAN interface of the HQ router.
    3. Assign the last valid IP address of the HQ LAN network to PC2.
    4. Assign the first valid IP address of the BRANCH1 LAN network to the LAN interface of the BRANCH1 router.
    5. Assign the last valid IP address of the BRANCH1 LAN network to PC1.
    6. Assign the first valid IP address of the BRANCH2 LAN network to the LAN interface of the BRANCH2 router.
    7. Assign the last valid IP address of the BRANCH2 LAN network to PC3.
    8. Assign the first valid IP address of the HQ to BRANCH1 link network to the Serial 0/0/0 interface of the HQ router.
    9. Assign the last valid IP address of the HQ to BRANCH1 link network to the Serial0/0/0 interface of the Branch router.
    10. Assign the first valid IP address of the HQ to BRANCH2 link network to the Serial 0/0/1 interface of the HQ router.
    11. Assign the last valid IP address of the HQ to BRANCH2 link network to the Serial0/0/1 interface of the Branch router.
    12. Assign the first valid IP address of the BRANCH1 to BRANCH2 link network to the Serial 0/0/1 interface of the BRANCH1 router.
    13. Assign the last valid IP address of the BRANCH1 to BRANCH2 link network to the Serial0/0/0 interface of the BRANCH2 router.
  • Document the addresses to be used in the table provided under the Topology Diagram.
  • Perform basic configuration of the BRANCH1, BRANCH2, HQ, and ISP routers according to the following guidelines:
  1. Configure the router hostname.
  2. Disable DNS lookup.
  3. Configure an encrypted EXEC mode password of cisco.
  4. Configure a message-of-the-day banner to say Cisco 2 Lab.
  5. Configure the password cisco for console connections.
  6. Configure the password cisco for VTY connections.
  7. Synchronize unsolicited messages for the console and virtual terminal lines.
  8. Configure an EXEC timeout of 15 minutes the console and virtual terminal lines.
  • Configure OSPF Routing
  • Make sure to disable OSPF updates from router interfaces that do not need them.
  • Configure a default static route on the HQ router and include it in the OSPF updates.

After the instructor has finished grading your lab:

Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that are normally connected to other networks (such as the school LAN or to the Internet), reconnect the appropriate cabling and restore the TCP/IP settings.

Includes the fully working packet tracer file.
Download immediately available after purchase